EPIC® Pro+ Ceramic Coating with Graphene is a high-quality, specially formulated sealant with a superior high-gloss finish, abrasion resistance, and enhanced UV ray protection. This unique formulation, enhanced with graphene, bonds with the clear coat to create a high level of hydrophobicity that prevents dirt, water spots, and other contaminants from adhering to paint. When professionally installed, EPIC® Pro+ Ceramic Coating with Graphene will provide your vehicle the ultimate “wet” look and is backed by a 4-year/48,000-mile warranty.
EPIC PRO Ceramic Installer Certification Watch the EPIC PRO Ceramic Coating How to Video for Installer Certification. Once you have watched the complete video, take the EPIC PRO Ceramic Installer Certification Test.
EPIC PRO Warranty Registration If you are an EPIC PRO Certified Installer and wish to register a coated vechicle for the Malco Warranty, register here.
Features and Benefits
Easy-to-apply ceramic coating
Part of the EPIC Ceramic Coating System
Excellent hydrophobic properties
Allows dirt, water and other contaminants to slide off
Provides up to 4 years / 48,000 miles of durability
SDS, TDS, and Ingredient Documentation
To view the SDS, TDS, and associated ingredients for this product you can search them HERE.
How to use it?
EPIC® PRO+ Ceramic Coating with Graphene requires a clean, smooth surface for proper adhesion. You must wash, clay bar, and machine polish your vehicle before coating application. We recommend washing the car with EPIC® Ceramic Prep Wash Concentrate and correcting paint imperfections with the EPIC® Paint Correction System. If you cannot achieve a professional level of cleaning and paint correction on your own, please seek the help of a professional detailer. Ensure the vehicle is at room temperature (50°F - 75°F) before you begin the application process. Only apply the product in a covered, dust-free garage and allow the vehicle to remain inside for at least 24 hours afterward. For optimal results:
Put on a pair of rubber gloves for protection. Shake the product well before use.
Clean and prep your surface with EPIC® Ceramic Final Prep Wipe using a lint-free microfiber cloth.
Wrap the suede application cloth around the applicator pad. For the first application, put 6 to 8 drops of the ceramic coating directly onto the cloth and immediately reseal the product. Put 4 – 6 drops on the cloth for subsequent applications.
Apply the ceramic coating to the vehicle surface in a crosshatch pattern, using even pressure. We recommend working in a defined 20-in x 20-in area until the product is worked into the clear coat.
Expect the coated area to rainbow or flash within 30-90 seconds of application. At this point, begin removing the product with a clean microfiber towel. Be sure to remove any remaining residue.
Repeat all steps to coat the entire vehicle, using an overlapping technique on each section to ensure full coverage.
These instructions are meant as an overview on how to use the product. For optimal results, please watch the full How to video provided above, and complete the certification test.
